Pages

Of Stamps & Smelters (Part 2)

Upper Peninsula, May 2007.

Early next morning I headed from Redridge back into Houghton and had breakfast at the Suomi Bakery, to get my usual panukakku and nisu toast. From there I went further north to Calumet, to scope that magical place one more time.

Coppo Block on the left, Mineral Range Depot on the right:


Many of the old Calumet & Hecla Mine buildings had been kept around and preserved for various uses:


Calumet & Hecla was the company that put Calumet, Michigan on the map; there were around 20 mine shafts operating in this town at one time, more than any other single location in Michigan. 


It was also the site of the famous Red Jacket Shaft, for a long time the world's deepest. The old buildings in this particular spot were clustered around the Calumet & Hecla Mine #2 shaft.


The shafts are all capped and covered up now, but the infinite labyrinths still exist below.


I don't remember which were which, but these structures were undoubtedly blacksmith shops, machine shops, dry houses and engine houses, etc., for the C & H mines' support operations.


There were about seven potential targets around Torch Lake that I wanted to hit on the way back south. Some I couldn't find, or were on private land, but most paid off. Calumet & Hecla Stamp Mill at Lake Linden however was a limited success, as only flat bare foundations remained:


The large raggedy-looking buildings of the Calumet & Hecla Smelter at Hubbell looked tempting as well, but entry was a questionable proposition:


It was at these two mighty sites that all the ore brought up from the mines beneath the city of Calumet was refined and smelted, and the fortunes of the region were transmuted into capital wealth. Between C & H and Quincy, they represented the two biggest and richest mining companies in the Copper Country. In fact C & H was once the richest mining company in the world. They are synonymous with Michigan copper.

Not far down M-26, I came to Tamarack City, and the enormous concrete foundations of the Ahmeek Stamp Mill:


Their sheer size alone inspires one to contemplate that mythical, once-glorious Michiganian industrial might of yore. Their titanic aspect just seems to suggest that they were built to withstand whatever unthinkably brutal pounding must have gone on here; of beating boulders into gravel, as if the god Vulcan himself were swinging his hammer to free the copper from the rock, preparing it for the fire.



The truth is that the Ahmeek Stamp is the last remaining steam-powered stamp in the Copper Country. The tall, rusty metal appendage seen on the left is what remains of its Nordberg Compound Stamp.


This is one of the most awe-inspiring ruins in the Copper Country--even all of Michigan. Its towering size, and just the way it has apparently been brutally smashed into gigantic chunks speaks to what must have been an unimaginable violence of force.


Each of these monoliths is about the size of a four-story building:


Now, just another row of tombstones...

 

The Ahmeek Mining Co. had four of these great stamps in operation in 1910, and added another four in 1914. Their mines lay considerably north of here, by Allouez and Copper City. I explored the Ahmeek Mine #1 and #2 in a different post.


One looks upon these ruins and imagines the terrible noise and shaking of the earth that must have accompanied their operation. Especially with so many houses of Tamarack City sitting just across the street, it seems it would be like enduring a constant earthquake to live there. The compound-expansion engines driving the stamps were capable of landing 104 blows per minute from a height of 24 inches, according to Lawrence Molloy's book. With eight of these behemoth mills going full tilt during WWI, that must have produced quite a roar. Each mill had the capacity to process 7,000lbs of ore in a day.


Though this might be the only place anywhere that one can see a Nordberg Stamp in its original position, one more of this mill's stamps was saved from the scrap heap, but it resides in a museum in Colorado.

Slightly further down M-26 from Tamarack on the way to Dollar Bay, the ruins of the Quincy Stamp Mill #1 also stand out. It was started in 1888 with three stamps, to replace an older one on Portage Lake. It was further upgraded in 1892 with the addition of two more stamps. 


Another mill a couple hundred yards into the woods north of here, the Quincy Stamp Mill #2, was added along the same rail spur in 1900. I did not know it was there, or I would have looked for it.


It was odd to see reinforced concrete mill structures here like the automotive plants I was used to seeing back home, but I guess they did sometimes build things in Copper Country out of something other than stone. This site was so busy processing the huge Quincy Mine's ore that it kept adding buildings all the way into the 1920s.


Looking uphill, I could see the piled stone of the railroad grade that dumped raw ore into the top of the mill. Again, remember that stamp mills worked by gravity, in a downhill direction:




I could see another taller building off into the woods uphill a little way. It was the turbine building, built in 1921:


























The Quincy Mine's stamp mill tailings spewed out into Torch Lake for generations, refining the ore that was brought down from the hills. Once that constant mighty stream of copper started to show signs of drying up, the company began to look for ways to keep revenue flowing, one of which was re-mining tailings that had been discarded as waste in their early days before the milling process was as thorough. 

Many of those tailings still had copper left in them that could be rendered using more advanced modern chemical-extraction methods. They came up with the idea of basically a giant vacuum cleaner on a boat to suck up the tailings from the lake bottom and shoot them in slurry form through a pipeline back to shore and into the Quincy Reclamation plant. Sorta like an alcoholic on hands and knees, desperately sucking spilled booze from the carpeting.


Most of the other major stamp mills on Torch Lake (Tamarack, Ahmeek, C & H, Osceola) followed suit and began re-refining their own tailings as well. These operations had all completely ceased by 1970 however, and the western banks of Torch Lake were left quiet again, a graveyard row of silent decaying mills, their toxic tailings marring the shoreline and poisoning its waters. Michigan's Copper Empire had finally come to an end.

This is Quincy's Reclamation Dredge #2, which I also explored in a separate post:


The #1 dredge sank in the middle of the lake in 1956.

I began the long trek back home. I stopped again near the town of Christmas to see the Bay Furnace, another old iron smelter on Lake Superior whose ruins have been stabilized and converted into a state park. Yes, there is a town named Christmas in the Yoopee. One of the most popular places in the world from which to mail a postcard.


According to Karthyn Bishop Eckert's Sandstone Architecture of the Lake Superior Region, the Bay Furnace Co. built a furnace near Onota in 1869-70 using rock quarried from the nearby Powell's Point quarry, and two sets of charcoal kilns, each set two and a half miles away from the furnace, so as to take advantage of the surrounding stands of hardwood timber available for fuel. Ships carried iron ore from Marquette to be fired here into pig iron before being reloaded for the rest of the trip down to the steel mills of the lower lakes. Bay Furnace operated with 800 men until June 1877 when it burned down. Its peak production was in 1874, making 8,359 tons of pig iron.

I also made one more stop in Munising to check out the town's many waterfalls:


That one is the aptly-named Munising Falls. Little did I know at the time, the ruins of the old Schoolcraft Blast Furnace sat near the trail to the falls.


References:
A Guide to Michigan's Historic Keweenaw Copper District, by Lawrence J. Molloy
Sandstone Architecture of the Lake Superior Region, by Karthyn Bishop Eckert

Of Stamps, & Smelters (Part 1)

Upper Peninsula, May 2007.

I resolved to execute a trip back to the Houghton area as soon as spring sprung in da Yoopee, to find some new ruins that had been brought to my attention. I also wanted to finally check out the ruins of the Fayette State Park, which is a "preserved" ghost town.

Fayette used to be a disgusting industrial hellhole based around an iron smelter for the Jackson Iron Co., and for a long time after that business dried up, it sat forgotten. Now its ruins are a tranquil, beautiful state park. It's located near the bottom tip of the Garden Peninsula, which juts down into Lake Michigan. This is one of the more remote places in da Yoopee. 


My plan (as always) was mostly to just "wing it" though there was some suave calculation on my part; I struck during the week before Memorial Day weekend, right at the beginning of Bug Season. Why have I capitalized "Bug Season?" Because it's a "thing" here.


The week before, while I was looking (unsuccessfully) for the ancient stone ruins in Negwegon State Park south of Alpena, I could just see clouds of mosquitos riving around like wisps of smoke. And I heard a sound like the high-pitched whine of big truck tires at high speed on the interstate. Then it occurred to me that I-75 was much too far away to be heard. The sound was that of the googolplexes of swarming mosquito wings. Thank god I was wearing 100% DEET, or I would've been sucked so dry by those bastards I woulda been nailhed-style jerky.


Anyway, going during dreaded Bug Season (and during the week) means no tourist traffic clogging the freeway. And before Memorial Day means no demented hike on gas prices. I slept in my car at Naubinway like usual, then continued on in the morning. The outside of my car had become encased in mosquitoes overnight.

Here's one of the furnaces:


The iron mining operations of Michigan existed in two main areas, the Gogebic Range in the southwestern Yoopee, and the Marquette Range in the central Yoopee. Iron ore mined in the Marquette Range would be sent by rail to the ports of Lake Superior (mainly Marquette) where it would be loaded onto freighters, and ore mined in the Gogebic Range would be sent by rail to ports on Lake Michigan (mainly Escanaba). Thus, each range served a different market, and accordingly, different steel-making cities.

Inside, it looks like there's still some slag left behind:


But often, in the early days before the transportation lines were able to support very much capacity, iron was smelted before it was shipped to the steel mill. That way there was not as much material to load onto a ship once it was purified, so little smelting towns like Fayette grew up along the shores of the lakes where it was convenient to do so. One thing that was needed was plenty of timber to feed the charcoal kilns, which in turn produced charcoal to fuel the smelter. A supply of quality limestone was also needed. Fayette filled that bill perfectly.

Just outside the furnace building was a set of charcoal kilns; conical structures that used to be a much more common sight in the Upper Peninsula of yore:


As ships got bigger and more numerous, the shipping lanes got safer, and the forests got depleted, iron smelting faded away from the Yoopee, leaving behind these monolithic ruins. Through the late 1800s when these sites were left to moulder, the hollow-domed structures of the charcoal kilns easily caved in, while the heavy-duty furnaces remain mostly intact.

Just beyond the charcoal kilns was a small lime kiln as well, for a complete set:


Jackson Iron Co. built the Fayette Smelter in 1867 and it operated until 1891 when the nearby forest was nearly used up. The Jackson Mine itself closed in 1901, and was later bought up by Cleveland-Cliffs. Oddly enough however, the eerie ruins and ghost town that remained here became a sort of tourist attraction after the turn of the century. Boats full of tourists, vacationers, and early ruin pornographers came from Escanaba often enough to justify keeping the town's old inn open for many years thereafter:




I walked the shattered limestone shoreline for a couple miles around the entire harbor, and basked in the pristine solitude for several hours.


There were many old foundations scattered in the woods along the peninsula, that used to belong to the houses of the village:


Some were still standing:




One was accessible...

Archaeology is even being conducted in many areas of the site:


From Fayette I trekked to the Superior shore on M-94 and arrived in Copper Country by evening. As I was cruising along Lake Superior outside of L'Anse, I saw a huge Bald Eagle soaring down along the beach. I'd always known they hung out up north and could be found, but it was crazy to see one cruising next to my car as I drove along the pristine beach.

Before sunset I made it out to Freda, an absolutely minuscule settlement that has been classified by some as a ghost town, though about 20 people still live there on the shores of mighty Lake Superior. I came to check out the ruins of the Champion Stamp Mill there. 
 

There are the ruins of four other stamp mills in the immediate vicinity, belonging to the Atlantic Mine, Baltic Mine, Adventure Mine, and Trimountain Mine, but they are all on private property, so I was forced to pass them up for now. Naturally, the Champion Mill processed ore from the Champion Mine.

Anyways, there is a cliff with a veteran's monument overlooking the ruins of the Champion Mill on the lake. Reading through the names of Freda's war dead from WWII, Korea, Vietnam, etc., I noticed that there were often several in a row with the same family name. Almost all of the names were Finnish.
 

Copper County Explorer explains that the Atlantic Mill was built first, in 1895, and the rest were built by 1901. The Champion Mill was the only one of the five to survive until the end of the Michigan copper mining era in the 1960s.


The many ruined concrete nubs you see in this vast open space once held machinery that was (believe it or not) all contained under one roof. The machinery that broke down the copper ore into finer and finer pieces started at the top where it was dumped into the mill from an elevated rail line, and as it was refined the ore was moved down to each successively lower level of the mill to undergo different operations.


Naturally, stamping copper ore into slime required a lot of water (to pollute), so any stamp mill worth its salt is going to be located near a large lake. 

Just up the trail from the mill ruin were some pretty impressive sandstone cliffs:


From Freda I went to the very nearby Redridge (an even smaller town) to check out the old Redridge Dam. It was built in 1901, meaning that I was visiting it on or about its 106th birthday. With five gargantuan stamp mills clustered on this part of the Superior shore all chugging away at full force a vast supply of water was needed, so they created a reservoir on the Salmon Trout River.


Redridge Dam is unique; there were only two other steel dams ever built in America. One was in Arizona, and one was in Montana, marking a period of a couple years where steel construction was tinkered with as a method for dam-building, because it could be constructed more quickly and cheaply than a masonry dam. 

 

What sets Redridge apart from the other two is that instead of having its supports anchored into bedrock, it needed a concrete foundation due to the local sandstone here being too brittle to use. It was designed and built by the Wisconsin Bridge & Iron Company. By the way, the dam in Arizona failed in 1908 and was destroyed, so only Michigan's and Montana's steel dams remain today.


"In 1888, the only dwellings at the mouth of the Salmon Trout River were five wigwams," Lawrence Molloy says in Guide to Michigan's Historic Keweenaw Copper District. By 1894, they were gone; the first timber dam here was constructed that year by the Atlantic Mining Co., whose stamp was the first one built in this area. But of course as they expanded and the Baltic Mill joined the scene, a bigger reservoir was needed, which was when the massive steel wall you see here (and the elevated railroad line crossing it) came into being.

One would think that a stamp mill built on Lake Superior would just pump its water straight from the lake, and most of them did. But for whatever reason, the first two mills that were built here--Atlantic and Baltic--chose to build a dam all the same.  


After the mines of the southern copper range closed, the engineers ceased maintaining Redridge Dam, and left its valves open to allow water to pass through safely. But there were still times when it would flood, such as on Easter morning of 1941, possibly due to a sudden snowmelt. Finally, rectangular holes were cut in the bottom of the dam in 1979 to drain the reservoir and keep the water level down. When that happened, the original c.1894 timber dam behind it was revealed once again:


After I was done ogling the forest of iron that makes up the dam's supports, I slept in my car again partially because there were no campsites around, and partly to avoid the mosquitos.



References:
http://www.coppercountryexplorer.com/explorations/mills/champion-mill/
Guide to Michigan's Historic Keweenaw Copper District, by Lawrence Molloy
Upper Peninsula of Michigan, An Inventory of Historic Engineering and Industrial Sites, HAER, 1978